$490000
High efficient heat treatment aluminum recovery plant in electrolytic aluminium production line
1.adopts foreign advanced technology
2.no need for any fuel, fast recovery
3.separate aluminum and ash only by one time
High efficient heat treatment aluminum recovery plant in electrolytic aluminium production line
Aluminium dross recovery machine, aluminum dross processing press, aluminium dross
processor, dross processing machine, aluminium melting furnace, dross recycling,
dross separator, dross recovery machine, slag processing machine, dross recycling
machine, ash separator, dross separating machine, aluminum dross separation,
aluminum dross recovery, aluminum dross recycling machine, aluminum dross
processing press, aluminum dross separator, aluminum dross recovery machine,
aluminium dross separation machine
Features of the aluminum ash separator machine:
1. No need for any fuel in the whole process
2. To reduce the dirt, smog pollution problem with dirt and smoke ventilation equipment.
3. Automatic mechanical operation, no harmful to the operator’s health.
4. High efficiency for recycling rate (90% of aluminum from the ashes), short working time (10- 12 minutes can process 100kgs-500kgs aluminum and ashes),
Aluminum ash separator is a machine adopts foreign advanced technology,
no need for any fuel, fast recovery, which can made full use of the aluminum ash
and scraps with high aluminum contents and replace the old way for recycling by
labor. This machine can , and has been very high efficiency for recycling rate (90% of aluminum from the ashes),
short working time (10 minutes for finish the separation of aluminum and ashes),
low electricity consumption, enviromental friendly(with dirt and smoke ventilation
equipment) features. The whole machine is fully automatic in mechanical working
way and its efficiency is increased 15% comparing with the manual way.
Technical parameter:
| Model | 1400 | 1100 | 900 | 800 |
| Overallsize(mm) | 1700*1700*2950 | 1450*1450*2800 | 1350*1300*2650 | 1180*1140*2480 |
| Ovenproof boiler(mm) | Φ 1400*650 | Φ 1100*650 | Φ 900*650 | Φ 800*650 |
| Discharge port size(mm) | 280*230 | 280*230 | 200*280 | 200*260 |
| Air outlet size(mm) | 260*400 | 260*400 | 260*300 | 250*200 |
| Capacity(kg/time) | 360-500 | 260-360 | 160-280 | 80-180 |
| Mixer motor(kw) | 11 | 7.5 | 5.5 | 3 |
| Mixer shaft diameter(mm) | 85 | 70 | 70 | 65 |
| Stir lifting motor (kw) | 0.75 | |||
| Feeding motror(kw) | 3 | |||
| Fan motor(kw) | 1.5 | |||
| Reducer reduction ratio | 1:1 | |||
This is our products:
Due to the difference in the purchase situation and question time of each consultant, the following responses are only valid for the questioner within 3 days, other netizens are for reference only ~
I want to consult