$26600~$31800
Swing Door Opener /Security Swing gate Operator/ automatic gate opener
|
Model:
|
WS680
|
|
Supply voltage:
|
24VDC
|
|
Power of motor:
|
40W
|
|
Rotational speed:
|
3200RPM
|
|
Max leaf length:
|
4m x 2
|
|
Max single-leaf weight:
|
400KG
|
|
Environment temperature:
|
-20℃~+50℃
|
|
Protection class:
|
IP55
|
|
Functions:
1.Open and Close the gate by remote control;
2.Auto closing when the gate is open, Time duration can be programmed from 0 to 99s; 3.Auto stop when the running gate meets with resistance; 4.The force of motor can be programmed; 5.It is selectable to control 1 leaf or 2 leaves; 6. It can be connected with 24V storage barrery. |
||
|
Power supply:
|
220VAC 50Hz
|
|
|
Transformer:
|
24V 150W
|
|
|
Accessories max loaded:
|
24VDC 500mA
|
|
|
Max load:
|
2×80W/24VDC
|
|
|
Environment temperature:
|
-20℃~+55℃
|
|
|
Protection fuse:
|
10A
|
|
|
Running time protection:
|
Adjustable
|
|
|
Auto closing delay time:
|
||
|
Force:
|
||
|
Protection class:
|
Ip55
|
|
|
Trouble
|
Cause
|
Shooting
|
|
Motor can not work
|
1,No power supply
2,Break fuse 3,Surpass load |
1,Check power supply
2,Change fuse 3,Check if any barrier on the track |
|
Can open but can not close
|
1,Photocell is not connected properly
2,Photocell beam is block off 3,Photocell is broken |
1,Connect the photocell
2,Clear out obstacle 3,Change a new device |
|
Can open (close) but can not close (open)
|
1,Position of limit switch is not correct
2,Limit switch is damaged |
1,Adjust position
2,Change limit switch |
|
Can not locate accurately
|
1,Distance of limit switch is too large
2,Limit switch is wrong 3,Magnetic-stell’s position is wrong |
1,Adjust position of limit switch
2,Change limit switch 3,Re-adjust the position |
|
Release device is doesn’t work
|
1,Operating handle is broken
2,Worm gears are jammed |
1,Change the handle
2,Rotate the pinion |
|
Push the “OPEN” button
but the gate close |
Whether “+MOTOR-” wires are
connected wrong |
Connect correctly according to
wiring diagram |
|
Motor can turn but can not work
|
1,Compression spring of clutch is dead
2,Gear box is released |
1,Change the spring
2,Couple the worm gear |
Due to the difference in the purchase situation and question time of each consultant, the following responses are only valid for the questioner within 3 days, other netizens are for reference only ~
I want to consult
