$5500
35000rpm portable 204 strongmicromotor 102L handpiece dental jewelry engraving tools
●Basic model, Mini-compact design
●Less-vibration standard carbon brush motor
|
Controller
|
||
|
Model
|
Strong 204
|
|
|
RPM
|
MAX 35,000 RPM
|
|
|
Input
|
100V,110V/230V,240V(50/60Hz)
|
|
|
Output
|
DC 0-32V
|
|
|
Torque
|
3 N.cm
|
|
|
Dimension
|
131*109*85
(mm)
|
|
|
Weight
|
1.3kg
|
|
|
Handpiece
|
||||||
|
Model
|
Strong 102L
|
Collet
|
2.35mm,3.0mm,3.175mm
|
|||
|
RPM
|
MAX 35,000 RPM
|
Weight
|
200g (without cord)
|
|||
|
Torque
|
3.5 N.cm
|
Dimension(mm)
|
158*85*73*29*113 (L*L1*L2 *D *D1)
|
|||
Never turn the power on when the collet is open or in the intermediate position. The spindle is in the locked position and will not turn. This will damage the motor.
2. Twist the Chuck Handle in the "R" or release direction (clockwise) until the raised indicator bar clicks into the far left mark on the silver center ring.
3. Remove the accessory and replace with another accessory. Insert the 'new' accessory shank fully into the collet for maximum support. You should feel it touch the back of the collet.
4.Twist the knurled Chuck Handle toward the "S" or secure position by turning counter-clockwise until it snaps to lock the collet. The accessory and the collet will be able to spin freely. The raised collet indicator bar will be above the far right mark in the silver center ring. Note: The intermediate position between "S" and "R" holds both the spindle and the accessory in a locked position. This is useful to unscrew an over-tightened mandrel screw.
[Strong 204+102L,35000RPM]
[GJ-G800+XM,50000RPM]
[Q9 Brushless 50000RPM]
[102L 35000RPM]
[E-type 35000RPM]
[spare parts]
[dental burs]
Due to the difference in the purchase situation and question time of each consultant, the following responses are only valid for the questioner within 3 days, other netizens are for reference only ~
I want to consult