Product Name: Bluetooth music ball
Style: tenth generation
Input voltage: AC 100-240V / 50 ~ 60Hz
Lamp beads: 27 lamp beads
Bulb diameter: 9.3CM
Bulb length: 9.3CM (manual measurement will be error)
Input voltage: 100V-240V;
Bluetooth distance: 10M,
Remote control distance 8M
Lighting the total power of 12W (IPL 7W, white light 5W, audio power 3W)
Light shell part of the material: PP environmentally friendly materials, imports of environmental protection speakers, LED environmental protection motherboard
Features
1. Small size, cute appearance, light weight.
2. Bluetooth connection music player, mobile phone can control the music player.
3. Remote control of the bubble color and music player.
4. Brightness can be adjusted.
5. Use environmentally friendly materials, green.
6. High translucent, E27 lamp, wide range of applications.
Occasion
Suitable for working in the studio, bedroom, restaurant, living room, cafes, restaurants, bookstores, yoga rooms, etc., to ease fatigue and stress.
Product specification
Specification
A.open or close the wireless bulb
1.open the Wireless bulb
a. the Wireless bulb that I pick up on the lamp hold ,through the power switch can turn on Wireless bulb power,After opening the Wireless bulb can see white LED lighting light up,and then have a wireless boot prompt music ring.
b. an on/off switch on the power action wireless bulb can in the white leds and LED to switch between the two cycle . Frist, open the power switch is white led light,if you need the switch to the color od wireless ball bubble after turning on the power supply of any model can use the remote to control all kinds of led working condition.
2.Close the Wireless bulb
in the boot state,through the power switch can instantly close wireless bulb:total power.
the wireless bulb,turning on the power supply can be opened or closed by remote control led lights,but this time the wireless function is not closed.
B. mobile phone pairing and connecting the wireless bulb
1.open the wireless bulb,bulb into the pairing mode automatically.
2.start the wireless phone and serach the wireless bulb.
3.from mobile phones to find the equipment list,select the device name is XXXX(such as:Speaker light 1),heard a matching complete after the prompt,say it has complete the connection of mobile phones and wireless bulb before.
4.if the phone has benn pairing and wireless bulb,direstly open the mobile phone wireless and wireless bulb,they can be automatically connected after the power .don' t need a moobile phone to serach for equipment.
5.if have mobile phones and wireless bulb is connected,if you need the wireless bulb and another one to connect, please put the wireless phone before closing for ball bubble and othe wireless phone matching connection.
6.Have wireless computer and wireless bulb is also used for matching,please refer to the specific pairing method computer wireless pairing method of wireless software.
C.Disconnect the wireless bulb
1. The need to disconnect the wireless bulb,please use the phone's wireless menu to remove the device from thr pairing list or disable wireless phones.
2.By turning off the power of the wireless bulb disconnect wireless bulb connected to the phone.
D.Infared remote control function
Through the infared remote control the color of the corresponding function keys can be carried out on the wireless bulb under control:
1.wireless ball bubble of a different color of chioce.
2.All kinds of automatic conversion mode switch.
3.The white LED light and color LED lamp brightness adjusrment.
4.LED lights turned on and off.
The tenth generation of Bluetooth music light bulbs
|
Input Voltage
|
AC 100-240V / 50~60Hz
|
Total power
|
12W rms
|
LED power
|
6W
|
Speaker power
|
3W rms
|
Frequrncy response
|
135Hz-15khZ
|
Wireless version
|
3.0
|
Support configuration
|
A2DP
|
Radio range
|
10m
|
LED light color
|
RGB
|
Cap base
|
E27 or B22
|
The two section switch
|
Switching between the white and color light
|