Duct rodder with guide / Lightweight Flexible Fiberglass rod / Fiberglass cable conduit rod
Product Introduction of Fiberglass Duct Rodder
Duct Rodder applies in tow leadrope through a pipe, it is auxiliary means. Surface smooth and high resilience, so the FRP
perforator with ease passes the narrow channel. perforator consists of two parts: the glass fiber strengthen the level, the
high-pressured low density polyethylene protective layer(smooth, firm , can resist the adverse circumstance). It has time
saving reducing effort, improving efficiency, etc.
And can be used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put.when use draws out the FPR
pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline. When cleaning, guidehead will drive
cleaning tools to clean the pipe;When arranges the cable, you may first leads the steel wire or the iron wire, then enters the
pipe with the steel wire or the iron wire hauling cable.
A. Fiberglass Duct Rodder type
Dia from 4.5mm to 18mm. The longth of fiberglass rod from 50 meter to 500 meter
B. Fiberglass Duct Rodder features
1. Strong non-conductive fiberglass rod construction
2. Stainless steel drawing head
3. For longer conduit runs and underground duct
4. Rugged tubular steel reel with adjustable position.
5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod.
6. Duct rods/duct rodders have Many applications, not only pulling the cable but also pulling electric tools, and it repair is
very easy, and available.
C. Specifications of Fiberglass Duct Rodder
Technical Date of frp duct rodder |
Specification |
Rod Diameter (mm) |
Φ4.5,Φ6,Φ8,Φ10,Φ11,Φ12,Φ13,Φ14,Φ15,Φ16 |
Rod Length (m) |
30m~500m |
Frame Spec.(mm) |
1300x450x1330,1200x420x1220,980x350x1000,680x240x700,420x180x400 |
Material: |
Fiber glass rod inner, |
Extruded by fiber glass and high strength resin at high temperature |
Fiber glass rod outer |
High Density polyethylene coating |
Metal Frame |
Steel with high-temperature sprayed plastic or hot dip galvanized |
Physical Property |
Fiber glass content |
75-80% |
Density |
>1.9gr/cm3 |
Working environment |
-40°C to +80°C |
Minimum Pulling strength |
4000N +/-5% |
Consistency of rod |
137gr/m |
Flexural Modulus |
>46.500Mpa |
Elongation at break |
2.5-3% |
Min Bending Radius |
388mm |
D. Product Pictures of Fiberglass Duct Rodder
E. FRP duct rodder Packaging:
Plastic woven bag and carton box or as your require.
F. Fiberglass Duct Rodder Applications:
Tracing duct rodders are used for commincation and drain cleaner and electric power pull.
Contact Information
If you are interested in our products, please feel free to contact us.
We will do our best to deal with the problems our customers encountered, in order to ensure our customers' satisfaction and also improve our better reputation.