$8000
Expanded vermiculite/1-3mm
| Quantity(Metric Tons) | 1 - 5 | 6 - 7 | 8 - 10 | >10 |
| Est. Time(days) | 2 | 5 | 7 | To be negotiated |
The anti crack mortar is composed of cement, quartz sand and polymer cementing material, and is composed of a variety of additives, which are mainly used for the anti crack protective layer outside the insulation layer. Polymer cracking mortar is professional for vitrified bricks cenosphere insulation layer and polystyrene particles insulation layer plastering crack of the ideal material, role of anti crack mortar in the insulation system is very important.
1. It has high bonding strength and is tightly combined with the base concrete, so it is not easy to hollow;
2. High strength, high surface hardness, wear resistance;
3. Automatic leveling, ground leveling control within 1mm or so;
4. According to the engineering needs, the thickness of self-leveling mortar can be selected between 3~~50mm, and the steel frame can be added in the mortar to meet the needs of heavy-duty traffic;
5.Can be made into a variety of colors to enhance the decorative effect;
6. Self-leveling mortar surface layer is hard and compact, resists corrosion of oil and lubricating oil, has good resistance to corrosion of sulfuric acid, ammonia salt and its composite salt and good anti-seepage performance
1:Anti-crack mortar for exterior wall thermal insulation polystyrene Board, extruded sheet bonding and plastering to prevent cracking.
2:Polymer cracking mortar is mainly used for "exterior insulation system of polystyrene board, plastic extruded board plastering, anticrack protective layer," polystyrene particles insulation mortar thermal insulation system "in the surface of anticrack protective layer, aerated concrete block wall plastering, anti crack mortar layer.
high strength cement based self leveling compounds
1.The substrate must be clean, dry firm and no any residue, then use Xindadi special interface agent to paint the base plane.
2.After about 2-6 hours, mixed with water before construction, be sure to strictly self-leveling cement: water 25:6 ~ 6.5kg mixed. First 6 ~ 6.5kg of water into the bucket, then pour the product side down while stirring until a homogeneous mixture, lay up 1 minute, then stir once again briefly.
3.Pour the mixture into the construction area, a zigzag rake to move to a desired uniform thickness (thickness constructability 1-4mm).
4.Before initial setting, use defoaming roller to exclude air which mixed in before.
- It is suitable for residential offices and commercial terraces.
- It is suitable to apply the smooth surface for next plastic floors, carpets and other decorating materials of hospitals, schools, gyms and theaters, etc.
- It is suitable for grand hotel, hall of airport, department stores, meeting room, exhibition center, big office and parking lot, etc.
- It is suitable to be the substrate of epoxy floor, pharmaceutical factory, food factory, industrial workshop and kindergarten, etc.
Shijiazhuang Wenhuang Building Materials Co., Ltd. is located in Shijiazhuang city, China we have grown in the past ten years to become a highly experienced and production and processing factory.
The company covers an area of 30,000 square maters ,of which 6,000 square meters are building area. The company has a large number of outstanding professional and technical personnel, research and development staff and management staff, a strong R & D, marketing and large-scale production capacity. Shun An international advanced level with a full set of production equipment, the production of special mortar and single product 50,000 tons, building insulation materials 150,000 cubic meters, the products are widely used in civil buildings, commercial buildings, municipal construction projects.
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, containers' quantity production time needs 1-2 weeks+,depends on order quantity.
A: Low MOQ, 1bag for sample checking is available.
A: We usually ship samples by DHL, UPS, FedEx or TNT and so on. Samples usually takes 5~7 days to arrive. Airline and sea shipping also optional.
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Due to the difference in the purchase situation and question time of each consultant, the following responses are only valid for the questioner within 3 days, other netizens are for reference only ~
I want to consult
$32000~$32000
Reinforcement of polymer bond mortar
$300~$300
Anti-crack mortar for building roof
