HDPE PE100 Pipe Grade Granules
Product Description
HDPE blow grade granules
High density polyethylene (HDPE) for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.
Blowing molding Grade HDPE
Injection Grade
Item |
Test Condition |
Test Method |
Value |
Unit |
MFR |
190°C/2.16kg |
ASTM D-1238 |
20 |
g/10min |
Density |
--- |
ASTM D-792 |
0.954 |
g/cm3 |
Tensile strength at yiled |
--- |
ASTM D-638 |
28 |
MPa |
Elongation at break |
--- |
ASTM D-638 |
250 |
% |
Impact tensile strength |
--- |
ASTM D-1822 |
42 |
kJ/m2 |
ESCR |
|
ASTM D-1693 |
3 |
--- |
VACIT |
--- |
ASTM D-1525 |
127 |
°C |
Application
For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
Packaging & Shipping
Packaging Detai :25kg/pp bag or as the customers' requirements
Delivery Detail:Shipped in 7 days after payment