Dust Removal Equipment Bag Filter Dust Collector

Dust removal equipment bag filters

General Introduction:

1) The cartridges are installed horizon. 
2) Offer high efficiency with our air filter cartridges 
3) Tool-free hole cap can be disassembled or replaced 
4) Choose the proper air filter cartridge according to the property of dust.

Construction: 
1) Material: Carbon steel or stainless steel 
2) Installed with pulse valves and control system 
3) Block building structure, can be constructed to handle the required airflow

Application: 

1) Welding fume, foundry 
2) Food, pharmaceutical 
3) Shot blasting 
4) Tobacco, metal, painting 

5) Energy

Working principle

Under the action of the main power fan, the dust gas enter into the dust subside chamber through air inlet. Dust gas is blocked flow board touch attack the airflow into the hopper. At the same time, air speed is slows down. Under the inertia and weight, the coarser particles directly into the dust discharger. Other light fine dust with air adsorb on the filter bag surface, the filtered clean gas through the filter bag into the box body and outlet.

 The PPC filter main body is separated into several air tank. There is a cylinder on each side outlet piping for lift valve. When the bag filter work after one cycle, the ash removal controller gives the signal, the first recess lift valve closed to cut off the flow of gas, enclosure of pulse valve open, with more than 0.4 Mpa compressed air into the net gas chamber, clear dust on the filter bag; When this action is completed, the lift valve to open, the chamber begin to work again, and one by one according to the above procedure complete soot cleaning action.

Company Information