$8000
Expanded vermiculite/1-3mm
It is a kind of dry-mixed powdery material includes special cement, redispersible polymer powder, cellulose ethers and other active ingredient, is a high-tech environment –friendly product with advanced technology and formula refined. With fast hardening, people can walk on it after 4-5 hours, and 24 hours later can do surface construction, it’s more convenient for workers to operate than traditional artificial leveling.
Technical specification
Standard: JC/T985-2005
Items |
Index |
|
Flowability (mm) |
Initial flowability |
≥135 |
20min flowability |
≥135 |
|
Tensile adhesive strength (Mpa) |
≥1.0 |
|
Wear resistance (g) |
≤0.50 |
|
Dimensional change rate (%) |
-0.15~+0.15 |
|
24h compressive strength (Mpa) |
≥6.5 |
|
24h anti-bending strength (Mpa) |
≥2.5 |
|
28 days compressive strength (Mpa) |
≥40 |
|
28 days anti-bending strength (Mpa) |
≥4.2 |
|
Application range
- It is suitable for residential offices and commercial terraces.
- It is suitable to apply the smooth surface for next plastic floors, carpets and other decorating materials of hospitals, schools, gyms and theaters, etc.
- It is suitable for grand hotel, hall of airport, department stores, meeting room, exhibition center, big office and parking lot, etc.
- It is suitable to be the substrate of epoxy floor, pharmaceutical factory, food factory, industrial workshop and kindergarten, etc.
Properties
Except excellent water repellence, it also provides the following benefits:
- Long-lasting efficiency
- Good workability
- Increase adhesion/flexural strength
- Improve alkali resistance-
- Improve abrasion resistance
- Compatibility with other additives
Construction method
1. The substrate must be clean, dry firm and no any residue, then use Xindadi special interface agent to paint the base plane.
2. After about 2-6 hours, mixed with water before construction, be sure to strictly self-leveling cement: water25:6 ~ 6.5kg mixed. First 6 ~ 6.5kg of water into the bucket, then pour the product side down while stirring until a homogeneous mixture, lay up 1 minute, then stir once again briefly.
3. Pour the mixture into the construction area, a zigzag rake to move to a desired uniform thickness (thickness constructability 1-4mm).Before initial setting, use defoaming roller to exclude air which mixed in before.
Attentions
1. No excess water or it may decrease the compressive strength.
2. No strong wind and sun within 24 hours after construction.
Package:
A. Standard Packing: In 25kg paper bags inner with PE bags
B. Big Bag or other special packages as per clients’ request.
Safety information:
The above date is in accordance with our knowledge, but don’t absolve the clients carefully checking it all immediately on receipt. To avoid the different formulation and different raw materials, please do more testing before using it. We reserve the right to alter our product and without informing in advance.
Due to the difference in the purchase situation and question time of each consultant, the following responses are only valid for the questioner within 3 days, other netizens are for reference only ~
I want to consult
$32000~$32000
Reinforcement of polymer bond mortar
$300~$300
Anti-crack mortar for building roof
