$70
Best quality Industrial Salt Ancient Foods
The basic raw material for the membrane Chlor-Alkali process is purified Sodium Chloride. The quality of salt plays an important role in the proper trouble-free production of Chlorine and Caustic Soda (Sodium Hydroxide). The introduction of membrane technology into the Chlor-Alkali Electrolysis has increased the demand for quality salt. The quality of Chlor-Alkali Grade used as raw material determines the life of the membrane cells. On the other hand, the consumption of electricity is dependent on the level of impurities in the salt.
Hub-Pak specializes in the production of chemically pure Chlor-Alkali Grade, this application offers a little better than what is needed to save cost in running, as well as in capital by the Chlor-Alkali industries. There are four different grades being offered to this sector. A special grade amongst these is absolutely trace-free from Ca, Mg, S04-2Sr, Ba, Al, Fe, and TOC.
Double Fortified salt is available in two grades at Hub-Pak. This idea of double fortification was conceived by those researchers who have been researching on this activity for well over 20 years. We have developed the process and offer two grades in double fortified salt, one being Salt Fortification with IRON and IODINE, mostly used for populations with acute iron deficiencies.
The second type of Double Fortified Salt we produce is with Fluoride and Iodine. It is produced at our facility with utmost care to keep levels of Iodine as well as Fluoride in a controlled and balanced form that conforms to food grade salt standards required to be met in certain countries where governments imply double fortified salts to be used as consumable to counter deficiencies of these minerals in their general population. We have mastered this technique of double fortification and have been exporting these products for almost a decade.
Dyes Manufacturing
The Dye Manufacturing Grade of salt is not only used to improve the colour of the dye on different fabrics but is also an important ingredient in the making of the dyes. Since Hub-Pak is the most credible source of salt, we provide to most dye manufacturers in Pakistan. There are 5 grades of salt that Hub-Pak offers to dye manufacturers. Other than the dye manufacturers, we also supply to pharmaceutical and food dye manufacturers. We cater to all the specific requirements these dye manufacturers have since the dye they produce is very sensitive to impurities.
Keeping in mind that Pakistan enjoys a prominent position in cotton production, Hub-Pak provides its customers with the high quality, credible dyeing salt with the main emphasis on maintaining the low hardness in salt and restoring the fabric colour.
Hub-Pak has specialized in the field of textile since Pakistan is a prime producer of cotton. We have been serving the textile sector for over 15 years now. We make sure that the textile sector is well taken care of by always bringing innovative grades in salt.
During the process of dyeing, the salt is used in the exhaustion of the dye into the fabric. Salt plays an important role there since it acts as the ionic force that transfers the dye onto the fabric. Poor quality salt gives uneven colour exhaustion which looks bad on the fabric. The hardness the salt is causing with its addition into the dye-bath is given much importance. Therefore, the main emphasis is on maintaining the low hardness in salt. The grades of dyeing salt start from a hardness of 180 ppm (50 g/l) and goes right down to zero hardness (any g/l) and in between there are 7 other different qualities.
The hardness alone is not the only factor that impacts the dyeing. The impurities also affect the quality of the dyed fabric or yarn. Since we have expertise in this region, we enjoy a handsome domestic market share as well as decades-old export customer that have the guarantee of our high quality, credible dyeing salt that will not create problems while using it for dyeing purposes.
Due to the difference in the purchase situation and question time of each consultant, the following responses are only valid for the questioner within 3 days, other netizens are for reference only ~
I want to consult