Product Description
ATC Square Engraving CNC machine Spindle motor is to meet high rapid wood, plastic engraving developing and requirements . With loss cost and high precision ,the square engraving spindle motor widely applied to CNC machines with engraving function.
Features:
1. Using P4 level centripetal thrust rolling bearing (also ceramic ball bearing), the strength and rigidity of the motorized spindle are greatly improved, and the rotating speed can reach 24000rpm/min.
2. All rotating parts have undergone high-precision dynamic balance test, and the residual value is lower than G0.4.
3. The protection of the closed shaft frame made of extruded aluminum makes the protection level of the spindle reach IP54, protecting the internal components from the threat of dust.
4. The independent electric fan ACTS as the active cooling device, which can bring the right amount of air needed for cooling even when the spindle stops running, and maintain a very low noise level.
Usage of spindle motor :
Suitable for woodworking engraving machine and processing center machinery, widely used in wood processing, plastic processing and other fields.
Specificiations
Motor power:7.5kw 9.0kw 12.0kw
Rate voltage:220V/380V AC
Max speed:24000RPM
Max current:25A
Max frequency:800HZ
Torque:7.16NM
Cone at the end of the shaft pulsates:≤0.001MM
Tooling change method:ATC
Tooling pulling force:2900N
Encoder:Sine-Cosine 1VPP(Optional)
Vibration Value:≤0.8mm/s
Cooling:air cooling
Weight:28kg
Structure |
|
Motor property curves |
|