$30000
Slag /silicon 65 Used Silicon Briquette For Metallurgy Steelmaking Casting
products information
Our factory supply 75% 72% 65% 45% four grades of ferrosilicon.
Ferrosilicon has been widely applied.in the steel industry, foundry industry and other industrial production.
Ferrosilicon is indispensable deoxidizer in the steel industry., ferrosilicon is used for precipitation deoxidation and diffusion deoxidation in Ju steel. Brick iron also as an alloying agent used in steelmaking. Adding a certain amount silicon to the steel can significantly improve the strength, hardness,elasticity and permeability of steel, reduce the hysteresis loss of transformer steel.
High ferrosilicon or silicon alloys is used for the production of low-carbon reductant in ferroalloy industry. Adding ferrosilicon to cast iron can be inoculant for ductile iron, and can prevent the formation of carbides, and promote the precipitation of graphite and the nodulizing, so as to improve performance of cast iron .
In addition, ferrosilicon powder can be used as a suspended phase in the mineral processing industry,and coatings for welding electrodes in the electrode manufacturing.
In the steel industry, one ton of steel consumes about 3 ~ 5kg75% ferrosilicon.
Melting point: 75FeSi to 1300 ℃
Brand |
Chemical Composition/% |
|||||||
|
Si |
Al |
Ca |
Mn |
Cr |
P |
S |
C |
|
≤ |
|||||||
FeSi75A10.5-A |
74.0-80.0 |
0.5 |
1.0 |
0.4 |
0.3 |
0.035 |
0.02 |
0.1 |
FeSi75A10.5-B |
72.0-80.0 |
0.5 |
1.0 |
0.5 |
0.5 |
0.04 |
0.02 |
0.2 |
FeSi75A11.0-A |
74.0-80.0 |
1.0 |
1.0 |
0.4 |
0.3 |
0.035 |
0.02 |
0.1 |
FeSi75A11.0-B |
72.0-80.0 |
1.0 |
1.0 |
0.5 |
0.5 |
0.04 |
0.02 |
0.2 |
FeSi75A11.5-A |
74.0-80.0 |
1.5 |
1.0 |
0.4 |
0.3 |
0.035 |
0.02 |
0.1 |
FeSi75A11.5-B |
72.0-80.0 |
1.5 |
1.0 |
0.5 |
0.5 |
0.04 |
0.02 |
0.2 |
FeSi75A12.0-A |
74.0-80.0 |
2.0 |
1.0 |
0.4 |
0.3 |
0.035 |
0.02 |
0.1 |
FeSi75A12.0-B |
74.0-80.0 |
2.0 |
1.0 |
0.4 |
0.3 |
0.04 |
0.02 |
0.1 |
FeSi75A12.0-C |
72.0-80.0 |
2.0 |
|
0.5 |
0.5 |
0.04 |
0.02 |
0.2 |
FeSi75-A |
74.0-80.0 |
|
|
0.4 |
0.3 |
0.035 |
0.02 |
0.1 |
FeSi75-B |
74.0-80.0 |
|
|
0.4 |
0.3 |
0.04 |
0.02 |
0.1 |
FeSi75-C |
72.0-80.0 |
|
|
0.5 |
0.5 |
0.04 |
0.02 |
0.2 |
FeSi65 |
65.0-<72.0 |
|
|
0.6 |
0.5 |
0.04 |
0.02 |
|
FeSi45 |
40.0-47.0 |
|
|
0.7 |
0.5 |
0.04 |
0.02 |
|
The reason why you choose us
1 we are trustworthy because of our quality and price
We always provide you the best products at the lowest price
2 we are trustworthy because of our professional
Henan Star Metallurgy Material Limited CO,LTD
The strongest reaserch team provide you the best products.
1 The factory ground is cleaned every day so as to keep the floor clean, garbage and debris are forbidden on site.
2 The material is knocked by workers hand work and knock into different particle size, particle size has strict requirement, must be within the scope of the requirements, inspection personnel measure with a ruler .
3 Bagging with a fork, in case put dust and broken material.
4 During bagging, this the second inspection,pick up the unfit grain size.
3 We are trustworthy because of our efficient
From the factory to the delivery, we always efficient and safety, that makes you always worry-free.
We are persevering in serving you wholeheartedly .
If you are interested in our products, please don`t
hesitate and contact with us . We will provide you the best products at the lowest price.
Due to the difference in the purchase situation and question time of each consultant, the following responses are only valid for the questioner within 3 days, other netizens are for reference only ~
I want to consult
