$5000
18,000L/HR TYPE HIGH VACUUM TRANSFORMER OIL REGENERATION MACHINE
Application:
The ZYD transformer oil filtration machine can remove the water, gas, and impurities in insulation oil high-efficiently, increasing the pressure force and quality of oil, make sure the electric device running safely. The machine is mainly used by electric power departments and industries to deal with various oils such as transformer oil, mutual oil, switch oil, freezer oil, and so on.
Performance of ZYD Transformer Oil Filtration Machine
Water Removal: Overall Water Content ≤5 PPM by removing free, emulsified, and dissolved water.
Particulate Removal: Particle counts as low as 1 micron.
Entrained Air and Gas Removal ≤ 0.3%
Acid Removal: can be equipped with fullers earth towers to neutralize acid and Lower TAN to < 0.03 KOH/g
Dielectric Strength:≥75kV per ASTM 877
Parameters | Unit | ZYD-35 | ZYD-50 | ZYD-100 | ZYD-150 | ZYD-200 | ZYD-250 | ZYD-300 | |
Flow | L/Hr | 2000 | 3000 | 6000 | 9000 | 12000 | 15000 | 18000 | |
Working vacuum | Mpa | -0.08 ~ -0.099 | |||||||
Working Pressure | Mpa | ≤0.4 | |||||||
Temperature Range | ℃ | 0 ~ 100 | |||||||
Power | Three Phase 50HZ 380V(or as needs) | ||||||||
Working hours without Trouble | Hour | 4000 | |||||||
Continuous Working Hours | Hour | 150 | |||||||
Working Noise | dB(A) | 75 | 75 | 75 | 80 | 80 | 80 | 80 | |
Heating Power | KW | 16 | 30 | 45 | 60 | 75 | 90 | 120 | |
Total Power | KW | 22 | 37.5 | 52.5 | 71.4 | 86.5 | 102.5 | 135 | |
Inlet/Outlet | mm | φ25 | φ32 | φ42 | φ50 | φ50 | φ60 | φ60 | |
Weight | Kg | 500 | 700 | 1050 | 1150 | 1450 | 1600 | 1950 | |
Overall | Length | mm | 1250 | 1400 | 1750 | 1850 | 1950 | 2050 | 2200 |
Width | mm | 900 | 1050 | 1350 | 1400 | 1500 | 1600 | 1750 | |
Height | mm | 1700 | 1850 | 2150 | 2200 | 2300 | 2400 | 2550 |
Moisture |
PPM |
≤3 |
Gas content |
% |
≤0.01 |
Impurity size |
μ |
≤1 (no free carbon) |
Breakdown voltage |
kV |
≥75 |
IFT |
dynes/cm |
≥40 |
Acid value |
mgKOH/g |
≤0.03 |
Dielectric loss factors |
tgδ(90°C) |
≤0.001 |
ASSEN warrants the plant supplied under this specification against defects in material and workmanship under normal use and service for a period of twenty-six (26) months from the date of shipment or twenty-four (24) months after the start-up of the system. ASSEN’s obligation under this warranty is limited to repairing or furnishing, a similar part to replace any part, which was proven to be defective within the warranty period.
1.We customize the machine to your requirements.
2.We have more than 20 years of export experience.
3.We offer our customers high-quality products at a competitive price.
4.We offer our customers excellent after-sales service.
5.We are not satisfied until our customers are satisfied.
Due to the difference in the purchase situation and question time of each consultant, the following responses are only valid for the questioner within 3 days, other netizens are for reference only ~
I want to consult