Product Description
Advanced Technology Industrial 3 5 7 Ply Corrugated Cardboard Recycling Machine
Description:
- Corrugated cardboard production line, the net paper width is 4400mm, the max.operating speed is 350m/min, it is mainly used to produce liner cardboard paper. It is mainly divided into the following parts: headbox, fourdrinier part, press part, front drying part, included column surface sizing machine, back drying part, calender part and reeling part.
Corrugated cardboard production line structure:
- Wire section: Comprised of wire frame,walking board,white water pan,forming plate, drainage foil, vacuum drainage foil,wet suction box,suction box,breast roller support and lifter,vacuum couch roller,wire-driving roller,wire-leading roller,compound roller, scraper, spray tube, slitter edge tail cutter,wire tension unit,guide and starch applicator, etc. longish wire is polyester forming wire and replaced in cantilever method.Jack is at the operating side, use jack which is applicable to load.
- Dehydration units in wire section: Dehydration units are configured according to max. basis weight and pulp type of the product, can ensure paper-making capacity. When the basis weight of paper-making changes,can adjust vacuum degree of vacuum dehydration units to ensure paper dryness.According to vacuum degree from low to high,configure that forming plate,drainage foil,vacuum drainage foil,low-vacuum wet suction box, high vacuum suction box. Dehydrating units touching with wire surface is made of ceramic, front part of wiper blade is flat and straight. Box body is made of stainless steel.Each vacuum suction box is equipped with steam/water separator and connection with vacuum main tube.
- Dryer section: The dryer are driven by closed gear box,all the bearings of dryer cylinders and the felt roll and bearing are lubricated by centrol thin oil station,The dryer comprised of cylinder body, cover, spindle nose and access hole cover. Connect cylinder cover with spindle nose with split bolt. Cylinder cover is structured into two layers.The dryer section has guide rolls paper roll, tension sensor, autoguide
Specification
Name |
Description |
Mill roll stand |
Shaft less hydraulic paper reel handling machines paper reel clamping, lift-lower, centering of the paper reel. Expandable chucks, pneumatic brakes. |
Single face |
Suction cover vacuum adsorb to guide paper, Cr-Mo alloy, diameter of roller is φ380mm. Pneumatically control the gap between glue roller and corrugated roller, Manual fine-tuning the amount of glue, Glue pump automatic cycle, Frequency Control, speed adjustment by investor. |
Conveying bridge |
Single face drive,Automatic synchronization operation.Electric adjusts centering cardboard,adsorb tensioner control. |
Double glue machine |
Adjust amount of glue and gap manually, pneumatic paper press, Automatic glue application and glue pump operation to control the glue thickness so that card boards are straight and higher bursting strength |
Triple preheater |
Eclectic or steam heating to adjust area of preheating, diameter φ800mm./ φ600mm |
Preheater |
Eclectic or steam heating to adjust area of preheating, diameter φ800mm./ φ600mm |
Double face |
520mm×22 pcs hot plate steam heated, 9m module, Intensive pressure roll-type, electric drive lift-lower as a whole. Cotton belt tensioned pneumatically, adjust tension of upper and lower belt. Active power- driven single-axis, frequency control. |
Thin blade |
Thin blade cutting machine adopt electromagnetic non-polar adjusting- speed motor drive,one level of V belt and chain transmitting, transfer the power to creasing wheel,thin blade and leading paper axis. Creasing wheel can axial move by hand,after ensuring the creasing position can tighten the screw in the creasing wheel. The down creasing wheel sometimes needs to turn the machine manually,after show the tightening bolt can axial adjust. |
Single blade NC. cutoff |
Imported AC servo motor, blade roller server control cut off; frequency control input and output paper transmission, automatic tracking of the production line speed; auto change order and storage more orders, made in Dongguang of Hebei province. |
Glue-making Circulatory system |
One unit of glue mixing tank with stirrer, glue storage system, glue recycle system, automatic glue level controller |
Air-Compressor |
Air-compressor station is composed of 0.9m³/min 2 air- pressure unit 1m³, 1 air tank, to supply air continuously at stable pressure |
Electric control system |
Digital display - Fully automatic PLC controlled system with Omron, Siemens, electronic and electric parts for longer life of the machine. |
Steam system |
Separate unit to supply steam for each machine group, flexible metal hose connects Heating pipes with rotating parts. |
Gantry stacker |
Gantry output |
Company Profile
Best in Agency was introduced in the year 2012 and since we are thriving under the leadership of Owner Mr. Benabdallah Brahim, who has more than 15 years of experience. We are located in Algeria and owing to a huge B2B directory base, we provide solutions to clients in African countries, The Middle East, South Asia, China and in near future also India (Construction and Mining).
Maximized Profits
Without tampering integrity, our pricing policy is formulated suiting to budget specifications of clients. We have been a great mediator to carry out lucrative deals for both the entities. Our associations with quality-oriented manufacturers and vendors in industry have helped us to bring forth exclusive collection of apparels. We ensure our dependability by serving our clients with error-free pre-production approval, sampling production control and timely delivery management.
Quality Management System
- Not only product specific, our quality management system encompasses every corporate process that affects quality on either ground. To maintain our quality promises, we do the following.
- After stringent hiring process, we have assembled team of specialized quality controllers.
- We do not believe in making mistakes. Thus, we adopt “do it right the first time” policy and implement “plan-do-check-act” approach.
- Evaluation and inspection of products.
- Keep our staff updated about new quality control procedures and train them accordingly.
- Keep ourselves aware of international approved, standards, methods & guidelines.
Why Us?
Gaining a reputable niche in a short span of time would not have been possible without our unique work methodologies and dedication to serve with world class assistance. Further, what makes us stand apart from other Buying Agents in industry are as follows :
- Well established and reliable sourcing network
- Ethical Business Practices
- Affordable & Dependable
- Perfect search as per buyers’ stipulations
- Integrated work culture